FRP (GRP) FLANGES & FITTINGS
Fabricated by contact molding with Hand Lay-Up methods
All of FRP (GRP) Flanges & Fittings are fabricated complied to international standard such as:
FRP Flanges & Fittings |
||
No. | Description | Standard Design Code |
| 1 | Glass Fiber reinforced Thermosetting Resin, for Fitting | ASME RTP-1 |
| 2 | Glass Fiber reinforced Thermosetting Resin, Pipe and Fitting Pressure | ASTM D2992 |
| 3 | Glass Fiber reinforced Thermosetting Resin, Pipe and Fitting Pressure | ASTM D5685 |
| 4 | Glass Fiber reinforced Thermosetting Resin, Gas Pressure Pipe and fitting | ASTM D2517 |
| 5 | STANDARD Flange Rise Face for thickness, Dimension, prssure and Drilling Dn.1/2" to 24" | ASME B16.5 RF Class #300 |
| 6 | STANDARD Flange Rise Face for thickness, Dimension, prssure and Drilling Dn.26" to 100" | ASME B16.47 RF Class #300 |
| 7 | STANDARD Flange Rise Face for thickness, Dimension, prssure and Drilling Dn.1/2" to 24" | ASME B16.5 RF Class #150 |
| 8 | STANDARD Flange Flate Face for thickness, Dimension, prssure and Drilling Dn.1/2" to 24" | ASME B16.5 FF Class #150 |
| 9 | STANDARD Flange Rise Face for thickness, Dimension, prssure and Drilling Dn.26" to 100" | ASME B16.47 RF Class #150 |
| 10 | STANDARD Flange Flate Face for thickness, Dimension, prssure and Drilling Dn.1/2" to 24" | ASME B16.5 FF Class #300 |
| 11 | STANDARD Flange Flate Face for thickness, Dimension, prssure and Drilling Dn.1/2" to 24" | JIS 10K FF Class #150 |
| 12 | STANDARD Flange Flate Face for thickness, Dimension, prssure and Drilling Dn.1/2" to 24" | JIS 10K FF Class #300 |
| 13 | STANDARD Flange Flate Face for thickness, Dimension, prssure and Drilling Dn.1/2" to 24" | JIS 5K FF Class #150 |
| 14 | STANDARD Flange Flate Face for thickness, Dimension, prssure and Drilling Dn.1/2" to 24" | ISO - 13 - 1978 PN - 10 |
| 15 | STANDARD Flange Flate Face for thickness, Dimension, prssure and Drilling Dn.1/2" to 24" | DIN 16966 / 2642 / 2576 |
| 16 | STANDARD Flange Flate Face for thickness, Dimension, prssure and Drilling Dn.26" to 100" | ASME B16.47 FF Class #300 |
| 17 | STANDARD Flange Flate Face for thickness, Dimension, prssure and Drilling Dn.26" to 100" | ASME B16.47 FF Class #150 |
| 18 | STANDARD Flange Flate Face for thickness, Dimension, prssure and Drilling Dn.1/2" to 100" | AS2129 |
| 19 | Glass fibre reinforced polyester resin (UP-GF) pipe fittings and joints; Laminated joints; Dimensions | DIN 16966 |
| 20 | Plastic Piping System for Drainage and Sewerage Supply with or Without Pressure for pipe,Fitting & joint | BS EN 14364 |
Industries Served:
Chemical Plant, Waste Water Treatment, Oil & Gas Industry, Pulp & Paper Industry, Wind Farm, Transportation Industry, and many more.
PHOTO GALLERY
View more images of FRP (GRP) Flanges & Fitting
*List above intended to inform standard types and sizes of FRP (GRP) Flanges & Fittings. There are various types and sizes that we capable to do depend on the needs of the project. If you need other types and size except mentioned above, please inform us.
GENERAL TYPES, DIMENSION & SPECIFICATIONS
| Table of Elbow 90° |
Dimension table of elbow 90° DN 15 – 3000
Design presure 3 bar – 10 bar
- Note:
Thickness may vary on every needs. Depend on elbow 90° conditions, situations, and designs. Table shown for reference purpose only. It is suggested to consult with the manufacturer to meet precise result to suit your needs.
| Table of Elbow 45° |
Dimension table of elbow 45° DN 15 – 3000
Design presure 3 bar – 10 bar
- Note:
Thickness may vary on every needs. Depend on elbow 45° conditions, situations, and designs. Table shown for reference purpose only. It is suggested to consult with the manufacturer to meet precise result to suit your needs.
| Table of Concentric Reducer |
Dimension table of Concentric Reducer
Design pressure 3bar – 10
- Note:
Thickness may vary on every needs. Depend on concentric reducer conditions, situations, and designs. Table shown for reference purpose only. It is suggested to consult with the manufacturer to meet precise result to suit your needs.
| Table of Eccenttric Reducer |
Dimension table of Eccentric Reducer
Design pressure 3bar – 10
- Note:
Thickness may vary on every needs. Depend on eccenttric reducer conditions, situations, and designs. Table shown for reference purpose only. It is suggested to consult with the manufacturer to meet precise result to suit your needs.
Dimension table of Equel Tee
Design pressure 3bar – 10bar
- Note:
Thickness may vary on every needs. Depend on equel tee conditions, situations, and designs. Table shown for reference purpose only. It is suggested to consult with the manufacturer to meet precise result to suit your needs.
| Table of FF Flange |
Dimension table of FF Flange
According to JIS 10K
- Note:
Thickness may vary on every needs. Depend on flange conditions, situations, and designs. Table shown for reference purpose only. It is suggested to consult with the manufacturer to meet precise result to suit your needs.
Dimension table of FF Flange
According to ANSI 150 FF 0r ASME B16.5 CL#150FF
- Note:
Thickness may vary on every needs. Depend on flange conditions, situations, and designs. Table shown for reference purpose only. It is suggested to consult with the manufacturer to meet precise result to suit your needs.
| Table of RF Flange |
Dimension table of RF Flange
According to JIS 10K
- Note:
Thickness may vary on every needs. Depend on flange conditions, situations, and designs. Table shown for reference purpose only. It is suggested to consult with the manufacturer to meet precise result to suit your needs.
Dimension table of RF Flange
According to ANSI 150 RF or ASME B16.5 CL#150RF
- Note:
Thickness may vary on every needs. Depend on flange conditions, situations, and designs. Table shown for reference purpose only. It is suggested to consult with the manufacturer to meet precise result to suit your needs.
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.