FRP (GRP) Pipes & Ducts
Products are designed for the most severe combination of conditions which may vary in every needs.
*It is suggested to consult with the fabricator to meet precise result to suit with the conditions.
Fabricated by contact molding with Filament-Wound and Hand Lay-Up methods.
For more than 22 years PT Teknoglass Duromer Internusa has been fabricating FRP (GRP) industrial equipments for various type and size. Specifically engineering designed to meet specific requirements.
Whether straight pipes or spool pipe lines, Cylindrical or Square Ducts PT Teknoglass Duromer Internusa offer various types of industrial equipments that could adjusted to your needs.
All of FRP (GRP) Pipes & Ducts are fabricated complied to international standard such as:
FRP Pipes |
||
No. | Description | Standard Design Code |
| 1 | Standard Specification for fillament-wound pipe | ASTM D2996 |
| 2 | Glass Fiber reinforced Thermosetting Resin ,Sewer pipe | ASTM D3262 |
| 3 | Glass Fiber reinforced Thermosetting Resin, Pipe Power | ASME B31.1 |
| 4 | Glass Fiber reinforced Thermosetting Resin, Pipe Pressure | AWWA C-950 |
| 5 | Glass Fiber reinforced Thermosetting Resin, Pressure Pipe | ASTM D3517 |
| 6 | Glass Fiber reinforced Thermosetting Resin, Pipe and Joint | ASTM D4161 |
| 7 | Glass Fiber reinforced Thermosetting Resin, Design for Pipe | ASME RTP-1 |
| 8 | Glass Fiber reinforced Thermosetting Resin, Pipe Installation | ASTM F1743 |
| 9 | Classification System for Reinforced Thermosetting Resin Pipe | ASTM D2310-71 |
| 10 | Glass Fiber reinforced Thermosetting Resin, Pipe design Manual | AWWA M-45 |
| 11 | Plastic Piping System for Water Supply with or Without Pressure | BS EN 1796 |
| 12 | Glass Fiber reinforced Thermosetting Resin, Pipe and Deplected | ASTM D3681 |
| 13 | Glass Fiber reinforced Thermosetting Resin, Pipe and Fitting Pressure | ASTM D5685 |
| 14 | Glass Fiber reinforced Thermosetting Resin, Pipe and Fitting Pressure | ASTM D2992 |
| 15 | Standard Specification for External Pressure Resistance of Plastic Pipe | ASTM D2924-70 |
| 16 | Glass Fiber reinforced Thermosetting Resin, Pipe Pressure and process | ASME B31.3 |
| 17 | Glass Fiber reinforced Thermosetting Resin, for Centryfugally cast, Pipe. | ASTM D2997 |
| 18 | Glass Fiber reinforced Thermosetting Resin, Gas Pressure Pipe and fitting | ASTM D2517 |
| 19 | Glass Fiber reinforced Thermosetting Resin, Sewer and Industrial Pressure Pipe | ASTM D3754 |
| 20 | Glass Fiber reinforced Thermosetting Resin, Pipe and Joint Using Flexible elasto | ASTM D4161 |
| 21 | Glass Fiber reinforced Thermosetting Resin, Pipe and Fitting to be For Marine Application | ASTM D1173 |
| 22 | Standard Specification for Cyclic Pressure Strength of Reinforced, Thermosetting Plastic Pipe | ASTM D2143-69 |
| 23 | Glass fibre reinforced polyester resin (UP-GF) pipe fittings and joints; Laminated joints; Dimensions | DIN 16966 |
| 24 | Plastic Piping System for Drainage and Sewerage Supply with or Without Pressure for pipe,Fitting & joint | BS EN 14364 |
| 25 | Standard Specification for Longitudinal Tensile Properties of Reinforced Thermosetting Plastic Pipe and Tube | ASTM D2105-67 |
| 26 | Plastics piping systems for pressure and non-pressure water supply, drainage or sewerage. Glass-reinforced thermosetting plastics (GRP) systems based on unsaturated polyester (UP) resin | BS EN ISO 23856:2021 |
FRP Ducting |
||
No. | Description | Standard Design Code |
| 1 | ASME BOILER and PRESSURE VESSEL CODE | ASME BPVC |
| 2 | Glass Fiber reinforced Thermosetting Resin, Pressure Pipe | ASTM D3517 |
| 3 | Standard Specification for fillament-wound pipe and DUCT | ASTM D2996 |
| 4 | Glass Fiber reinforced Thermosetting Resin, Desiain for Pipe and Ducting | ASME RTP-1 |
| 5 | Glass Fiber reinforced Thermosetting Resin, Pipe and Joint Using Flexible elasto | ASTM D4161 |
Designed with specific engineering calculations to withstand operating pressures, temperatures and any other possibilities of physical abuse caused while providing maximum resistance to corrosion.
Design comes with isometric (2D) drawings and 3D model which are more easy to be read
Using only with selective materials to construct and comes available within Manufacturing Data Record.
Maximum size & dimension of production capability are limited by inland transportation. Maximum dimension for inland transportation: L 12.000mm x H 3800mm.
Products which over the maximum size & dimension for inland transportation will be fabricated on site or could be negotiable.
Industries Served:
Chemical Plant ? Waste Water Treatment ? Oil & Gas Industry ? Pulp & Paper Industry ? Wind Farm ? Transportation Industry, and many more.
Potential Uses of FRP (GRP) In Industrial Sector:
Drill Sites – Mud Handling Equipment ? Offshore Platforms ? Field Liquid Storage Vessels (Chemical / Non- Chemical) ? Brine and Saltwater Lines ? Saline/Brine Discharge Lines ? Undersea Gathering Lines ? Pipe Linings ? Casing Linings ? New Pipelines ? Railway Tank Cars ? Etc.
GALLERY
View more images of FRP (GRP) Pipes & Ducts
COMPARISON OF FRP (GRP) AND OTHER MATERIALS
Read about characteristics of FRP (GRP) material among other materials
GENERAL TYPES, DIMENSION & SPECIFICATION
| Standard Minimum Thickness for Round Duct |
STANDARD CODE : NBS Voluntary Product Standards PS 15-69
Note
* These ratings are suitable for use up to 180?F or (82,2?C) in pressure service and ambient atmospheric temperatures on vacuum service. For ratings at higher temperatures consult the manufacturer
| Table Standard Minimum Thickness for FRP Pipe |
Dimension table of pipe DN 15 - 3000
Design pressure 3bar - 10bar
Note:
*Dimension DN15mm – DN40mm process fabrication HLU
*Thickness may vary on every needs. Depend on pipe conditions, situations, and designs. Table shown for reference purpose only. It is suggested to consult with the manufacturer to meet precise result to suit your needs.
Dimension table of pipe DN 15 - 3000
Design pressure 11bar - 20bar
Note:
*Dimension DN15mm – DN40mm process fabrication HLU
*Thickness may vary on every needs. Depend on pipe conditions, situations, and designs. Table shown for reference purpose only. It is suggested to consult with the manufacturer to meet precise result to suit your needs.
| BEL & SPIGOT JOINT |
| BUT & WRAP JOINT |
| SHOCK JOINT |
| Support Pipe & Ducting |
-
- ISOMETRIC VIEW
-
- ISOMETRIC VIEW
-
- FRONT VIEW
-
- TOP VIEW
| Support Pipe Spool |
-
- ISOMETRIC VIEW
-
- ISOMETRIC VIEW
-
- ISOMETRIC VIEW
-
- FRONT VIEW
-
- FRONT VIEW
-
- FRONT VIEW
-
- ISOMETRIC VIEW
-
- ISOMETRIC VIEW
-
- FRONT VIEW
-
- FRONT VIEW
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.